Vag COM KKL VAG-COM 409.1

This diagnostic cable is usable for ISO9141 and KWP2000transmission protocol.

Description:

This diagnostic cable is usable for ISO9141 and KWP2000transmission protocol like used for example by:
Volkswagen/Skoda/Audi/Seat

Function:

Read & erase error code,log data e. g. speed, gasoline,consume engine-rotating (RPM: Rotation Per Minutes).

Specification:

1.This cable can not work if your car uses a protocol/ bussystemlike VPW,PWM or Can-bus.
2.Terminal Bus of communication
3.Terminal L=Ignition for waking up car computing system (ECU:Engine Control Unit)
4.Existed 3 different protocols with same OBD2 connector incl.ISO/KWP, VPW, PMW
5.This K/L Diaqnostic interface & cables work on ISO/KWP (KevWord Protocol) Iaunched after 1996 only
6.Supported also ISO9141 protocol
7.The cables may work with some versions of the Carsoft, butcarsoft used a lot of different interfaces during the differentversions and also had some custom interfaces.
8. Product running as virtual comport, like many products it use aUSB to Rs232 converter chip .But under special circumstances thiscan give some problems regarding time especially on the handshakelines.

Packaged list:

1 x VAG COM 409.1 Cable
1 x Driver CD